Difference between revisions of "Identify Your Paistes"

From Cymbal
Jump to navigation Jump to search
m
 
Line 67: Line 67:
 
<gallery>
 
<gallery>
 
File:505 Stamp and Logo.jpg|505 Stamp and Emboss
 
File:505 Stamp and Logo.jpg|505 Stamp and Emboss
 +
File:Trad-logo-crack.png|Trad Emboss Logo Crack
 
</gallery>
 
</gallery>
  

Latest revision as of 09:00, 12 June 2019

It is not uncommon for people to come across Paistes that are not completely identifiable. This includes vintage cymbals which the ink stamped logos and labels have been removed or faded. More modern cymbals can be rendered ambiguous if cleaned improperly.

This page includes points used to identify cymbals that do not have proper labeling that has survived.

Please note that for this conversation, the term "embossed" refers to anything pressed into the metal of the cymbal, and the word "stamped" refers to any wording applied in ink. In other arenas these terms may not be used in the same way.

Alloys

There are several alloys used in the production of Paistes. The easiest way to determine the alloy of an unknown cymbal is visually. However, the colour may be difficult to judge in digital photographs. It is recommended that when trying to identify a cymbal that it be done in person. Comparing to a cymbal of a known alloy is helpful if one is not familiar with the hues of the different alloys.

The formulae noted below refers to the amount of tin is mixed in with the main metal ingredient, copper. So, the B8 formula would be 8% tin to 92% copper, for example. The Brass and Nickel-Silver alloys differ slightly from this formula scheme.

B20 Alloy

B20 tends to have a silver or white colour hue. It is more pale than either the B15 and B8 alloys. The copper in the alloy will oxidize when exposed to excessive moisture.

Series that use this alloy: Formula 602, Sound Creation, Twenty, Twenty Custom Collection, and Twenty Masters Collection.

B15 (Signature) Alloy

B15, or Proprietary Signature Bronze (PSB) alloy, can be identified by lusterous yellow colouration. Like all bronze, a blue/green oxide will be found when exposed to excessive moisture. This cupric oxide is what gives the Statue of Liberty it's characteristic colour.

In early promotional materials, Paiste referred to this alloy as PSA - Paiste Sound Alloy.

Series that use this alloy: Signature, Signature Dark Energy, Signature Traditionals, and Visions (certain models).

B8 (2002) Alloy

B8 bronze has a noticable orange hue to it. This is readily seen in clean cymbals, but is also present in cymbals that have developed a patina. One noticeable exception is the RUDE line. RUDEs are B8 cymbals but have a characteristic unlathed appearance. The colour of a RUDE may have a tint (green or brown usually) but the lack of lathing and the raw colour from the annealing process give them away. Moisture will cause B8 to develop a tell tale blue/green oxide.

Series that use this alloy: Alpha, Dimensions, Giant Beat, RUDE, 2002, 3000, 2000, 505, 404, among others.

Brass

Brass cymbals have a colour similar to B15 although lacking the luster. They also feel lighter and warmer due to the density and thermal conductivity of the metal.

Nickel Silver

Cymbals made of nickel silver have a steely silver colour. This colour tends to be more sterile looking then B20 alloy, resembling steel in many cases. Nickel silver is known for not corroding easily and may only have a light surface patina, rendering them more of a grey colour. If exposed to moisture, they will not develop the blue/green oxide indicative of cupric alloys.

Series that use this alloy: Dixie, Ludwig, Stanople, and Super, among others.

Serial Numbers

Please see the special page that examines these in detail - Serial Numbers

Prototypes may or may not adhere to the serial number patterns in all respects.

Series Logos

The other important embossed information is the series stamp. Early Paistes used this method exclusively for identification of the cymbal. The typical embossed logos can be see on the various series pages. In many cases this was later replaced with ink stamped logos.

Embossed logos are usually found at the 12:00 position on the cymbal.

Spotting details include:

Very early 2002 cymbals used a logo with a border that is not seen in later examples. It is thought that this indicates cymbals from 1971. Examples have not included serial numbers indicating that they were from 1971 or 1972. Early Traditional models had an embossed or etched Paiste script logo. This was discontinued after the first or second year. Cracking about the embossed logo has been sited as a reason for this change.

Ink Stamps

Paiste started to use ink stamps to identify their products a few decades ago. These are used to identify the series, type and size of the cymbals. There are several extra ink stamps found on some cymbals, including identification of the Seven Sound Set number, and more recently special artwork to highlight artist models.

Series Stamps

Found in the 12:00 position these serve the same purpose as the embossed logos. They have come to replace embossed logos. But there was a transitional period where both inked and embossed logos both appeared on cymbals. This is generally the "black label" period as seen in the Formula 602 and 2002 series. The "black label" era refers to early ink stamps where only black was used in the series logo.

With the shift away from embossed logos, Paiste started adapting the use of different coloured inks that correspond to the various series. For example, 2002s have a distinctive red logo, 505s are known for a green logo, and the final era of the Formula 602s are referred to as "blue labels" for obvious reasons.

Prototypes

Prototypes tend to be a bit non standard in their labeling. It is common practice for the 12:00 position to contain the word "Paiste" in large print. In smaller print,the word "Prototype" normally appears in a smaller size just below this. Examples exist the do not include the word "Prototype". These stamps have only been observed in black on non-coloursound treated cymbals, and white for coloured cymbals.

Spotting details include:

Prototypes do not contain any production series identifiers, except for a small sticker often found on the back of the cymbal. It is unclear whether this is an indication of wht series the cymbals was designed for or if it is only used as a guide for pricing the cymbal by retailers.

Prototypes often use "generic" model designations, i.e., "Crash", "Ride", "Hi-Hat", et cetera.

Size Stamps

During the "black label" era, size stamps appeared under the bell. They later were moved to the front of the cymbal and placed below the type identifier in the 03:00 position. Like the type label, they are usually in a sans serif font. When using the sans serif font, the number is in a bold type face. There has been subtle variation in the font over the years, such as the inch symbol being in either a bold or non-bold font.


Spotting details include:

  • RUDES uses a stencil font for the type label, but the standard sans serif font for the size.
  • In the 1990s the size has become part of the type label for the Traditional and Signature series
  • Like the type label, the size label of prototype have been found in the 03:00 position and 12:00 position.
  • Giant Beats lack the size on both the original, and re-issues.


Artist Model Stamps

There have been a limited number of artists model stamps ranging from simple sans serif text to graphics.

Spotting details include:

  • The Formula 602 Joe Morello cymbals included his name stamped in the 03:00 position with the type identification.
  • The phrase "Seven Sound Set" and the corresponding type number is stamped in the 03:00 position in red ink.
  • The Sheila E. Sex Cymbal is unusual in that the stylized artists name is stamped in the 12:00 and the term "Sex Cymbal" appears in the 06:00 position.
  • The RUDE 24" Mega Power Ride (John Dolmayan) includes the "Eclipse" moniker in the 03:00 position just above the type label.
  • The initial release of the Black Alphas use a unique gold tones ink and include the Slipknot logo in the 09:00 position.
  • The Signature 22" Blue Bell Ride (Stewart Copeland) features white "The Rhythmatist" logo in the 06:00 position under the cymbal type label.
  • The Signature 22" Reflector Bell Ride (Nicko McBrain) has "Powerslave" written in Iron Maiden font together with Eddie stencil in 06:00 position under the cymbal type label.


Lathing

In the absence of embossed or stamped logos, cymbal identification can be performed by evaluating the lathing. Many series have very distinct lathing. For example, RUDES are known for not being lathed at all (with the exception of the 24" Mega Power Ride, and Innovations have the "Sound Texture" lathing that looks as if the lathing tool was allowed to skip across the surface.

Spotting details include:

           Coming soon. 


Hammering

In addition to the lathing, the hammering of a cymbal can be critical to identifying a cymbal when no embossed or stamped logos are found. And just as with lathing, various series have characteristic hammering. In some cases, such as the 2002 Wilds, the sub-series has a distinct heavy hammering.

Spotting details include:

           Coming soon.